ZionYEE Ceramic White — AI generated illustrative visualization; 标准卷膜首卡. Appearance illustration is not physical product evidence.

ZionYEE Ceramic White Car Wrap Film 5×50ft

Ceramic White / 5FT x 50FT
$289.00
Sale price  $289.00 Regular price 
Skip to product information
ZionYEE Ceramic White — AI generated illustrative visualization; 标准卷膜首卡. Appearance illustration is not physical product evidence.

ZionYEE Ceramic White Car Wrap Film 5×50ft

$289.00
Sale price  $289.00 Regular price 
Size/ColorCeramic White / 5FT x 50FT

Ceramic White is a clean, bright white from ZionYEE's Ceramic Gloss range — closer to fresh porcelain or a new appliance panel than to the cream or pearl off-whites some films lean toward. This is a colour-change vinyl film supplied as one 5 ft × 50 ft roll, aimed at drivers who want the crispest possible white base for a full colour change or a two-tone build.

  • Clean bright white with a high-gloss ceramic finish that holds reflections evenly across panels
  • Acrylic-based air-release adhesive, repositionable during fitting; dry application
  • One roll, 5 ft × 50 ft (250 sq ft gross) for full colour changes, panel work and accent stripes

FAQ

Is this a pearl or metallic white?

Neither. It is a solid bright white with no flake or pearl content, which is why it reads cleaner and flatter than most factory pearl whites.

Will it look the same as on my screen?

Close, but not identical. White is the colour most often rendered too grey or too blue by a display, so expect a small difference between screen and film.

Does white show dirt badly?

It shows dust and road film sooner than darker colours. Regular pH-neutral hand washing keeps it looking even.

Can I reposition a panel while fitting?

Yes. The acrylic-based air-release adhesive is repositionable during installation, which is what makes a DIY fitting practical.

Will one roll wrap my whole car?

Depends on the vehicle. 250 sq ft of material is not 250 sq ft of installed coverage — measure your panels and plan seams before assuming one roll is enough.

ZionYEE Ceramic White Car Wrap Film 5×50ft

Finish and appearance

Ceramic Gloss
Ceramic White reads as a neutral, faintly cool white rather than a warm ivory. Think a glossy ceramic tile or the white of a new refrigerator door — not the yellowed white of old paint, and not the grey-ish white of primer. Held next to a factory pearl white it will look flatter and cleaner, because there is no pearl or metallic flake in it.

The gloss layer is what gives this colour its "ceramic" character: reflections stay tight and even, so body lines read as clear highlights instead of soft glows. In direct sun the white can blow out slightly at the peaks of curved panels, and it will show warm bounce from asphalt or brick surroundings. In shade it picks up the colour of whatever is around it — trees, buildings, an overcast sky — more than a dark film would, and at night under artificial lighting it takes on the colour of that light source fairly readily.

Whites are the hardest colour to photograph and the hardest to display accurately on a screen: a monitor will usually render them either slightly grey or slightly blue. Gallery images of this colour are AI-assisted visualisations, so treat them as an indication of the intended look rather than a colour-accurate swatch.

Appearance varies with lighting, viewing angle, panel shape and display.

Specifications

Finish
Ceramic Gloss
Roll width
5 ft
Roll length
50 ft
Gross roll area
250 sq ft
Adhesive
Air-release; supports lifting and repositioning during installation
Release liner
PET
Typical applications
Full or partial vehicle wraps, interior trim and accents

Coverage depends on the vehicle, panel layout, installer and cut plan. Follow the product instructions for film-specific construction and application details.

Plan your material

This roll measures 5 ft × 50 ft (250 sq ft gross area). It does not guarantee coverage for a particular vehicle.

  1. Measure panels individually, including edges and curves.
  2. Check cut direction and seams against the 5 ft width.
  3. Allow for alignment and recuts; confirm the plan with your installer before cutting.

How much vinyl wrap do I need?

Installation and care

The air-release adhesive helps trapped air move toward an open edge. The film can be lifted and repositioned during installation. Apply as directed in the instructions supplied for this film.

Wait 24–48 hours before the first wash. Hand wash with pH-neutral car shampoo and avoid abrasive or automatic brush washes. For removal, use heat-assisted removal as directed for this film; paint condition and installation time can affect results. Test a small area first.

Car wrap installation for beginners

Gallery images are appearance references for this colourway. Lighting, screen settings and panel shape affect how the colour reads.

Shipping and returns

Free tracked shipping to eligible addresses in the contiguous United States. Please see our shipping policy for processing times, destination-specific delivery estimates and service exclusions. Shipping Policy

Returns may be requested within 30 days of delivery. Eligibility and item-condition requirements apply. Returns Policy

You may also like