ZionYEE Crystal Sea Breeze Blue car wrap; AI-generated storefront product visualization; illustrative appearance, not physical material or customer-installation proof.

ZionYEE Crystal Sea Breeze Blue Car Wrap Film 5×50ft

Sea Breeze Blue / 5FT x 50FT
$269.00
Sale price  $269.00 Regular price 
Skip to product information
ZionYEE Crystal Sea Breeze Blue car wrap; AI-generated storefront product visualization; illustrative appearance, not physical material or customer-installation proof.

ZionYEE Crystal Sea Breeze Blue Car Wrap Film 5×50ft

$269.00
Sale price  $269.00 Regular price 
Size/ColorSea Breeze Blue / 5FT x 50FT

Crystal Sea Breeze Blue is an airy, light pastel blue from ZionYEE's Crystal Gloss range — closer to a clear horizon sky or a pale robin's-egg than to a deep sea blue. It is a colour-change vinyl film supplied as one 5 ft × 50 ft roll for drivers who want the lightest, most open blue in the range.

  • Airy pastel blue — the lightest blue ZionYEE offers, non-metallic
  • Acrylic-based air-release adhesive, repositionable during fitting; dry application
  • One roll, 5 ft × 50 ft (250 sq ft gross) — enough material to plan a full colour change; usable coverage depends on your cut plan

FAQ

Is Sea Breeze Blue the same as Glacier Blue?

No. Both are pale non-metallic blues, but Glacier has more grey in it and reads like ice, while Sea Breeze is lighter and slightly more colourful.

Is it glossy?

Yes — high-gloss crystal finish with clear reflections.

Will the colour wash out in the sun?

The brightest highlights can push toward near-white, because a pale film shows reflection more than pigment. Away from the direct reflection the blue stays clear.

Can I reposition the film while fitting?

Yes. The acrylic-based air-release adhesive is repositionable during installation, which is what makes a DIY fitting practical.

Will one roll wrap my whole car?

Depends on the vehicle. 250 sq ft of material is not 250 sq ft of installed coverage — measure your panels before assuming one roll is enough.

ZionYEE Crystal Sea Breeze Blue Car Wrap Film 5×50ft

Finish and appearance

Crystal Gloss
This is the airier of the two pale blues in the range. Where Glacier Blue carries grey and reads like ice, Sea Breeze Blue carries a little more colour and sits closer to a pale robin's-egg shell or the washed blue of a summer sky near the horizon. Neither has metallic flake; the difference is that Sea Breeze is lighter and a touch warmer.

The high-gloss layer does give the thin colour some depth over curves, but because the base is so light, most of what you read on a bright day is reflection rather than pigment. Sunlight pushes the highlights toward near-white; shade brings the blue back out clearly; at night it becomes a soft, pale grey-blue that only shows its colour under stronger lighting.

Expect a real gap between screen and film here. Very light blues are usually rendered either chalky or over-saturated by a display, and the true shade sits somewhere in between. Judge the delivered roll outdoors, before unrolling or cutting.

Appearance varies with lighting, viewing angle, panel shape and display.

Specifications

Finish
Crystal Gloss
Roll width
5 ft
Roll length
50 ft
Gross roll area
250 sq ft
Adhesive
Air-release; supports lifting and repositioning during installation
Release liner
PET
Typical applications
Full or partial vehicle wraps, interior trim and accents

Coverage depends on the vehicle, panel layout, installer and cut plan. Follow the product instructions for film-specific construction and application details.

Plan your material

This roll measures 5 ft × 50 ft (250 sq ft gross area). It does not guarantee coverage for a particular vehicle.

  1. Measure panels individually, including edges and curves.
  2. Check cut direction and seams against the 5 ft width.
  3. Allow for alignment and recuts; confirm the plan with your installer before cutting.

How much vinyl wrap do I need?

Installation and care

The air-release adhesive helps trapped air move toward an open edge. The film can be lifted and repositioned during installation. Apply as directed in the instructions supplied for this film.

Wait 24–48 hours before the first wash. Hand wash with pH-neutral car shampoo and avoid abrasive or automatic brush washes. For removal, use heat-assisted removal as directed for this film; paint condition and installation time can affect results. Test a small area first.

Car wrap installation for beginners

Gallery images are appearance references for this colourway. Lighting, screen settings and panel shape affect how the colour reads.

Shipping and returns

Free tracked shipping to eligible addresses in the contiguous United States. Please see our shipping policy for processing times, destination-specific delivery estimates and service exclusions. Shipping Policy

Returns may be requested within 30 days of delivery. Eligibility and item-condition requirements apply. Returns Policy

You may also like