ZionYEE Liquid Metal Tungsten Steel Car Wrap Film 5×50ft
ZionYEE Liquid Metal Tungsten Steel Car Wrap Film 5×50ft
Liquid Metal Tungsten Steel is a dark gunmetal metallic from ZionYEE's Liquid Metal range — closer to a machined tungsten tool or a brushed gunmetal watch case than to a silver or a plain grey. It is a colour-change vinyl film supplied as one 5 ft × 50 ft roll for builders who want a heavy, industrial metal look.
- Deep gunmetal gray with a warm metal undertone and a fluid metallic reflection
- Acrylic-based air-release adhesive, repositionable during fitting; dry application
- One roll, 5 ft × 50 ft (250 sq ft gross) — enough material to plan a full colour change; usable coverage depends on your cut plan
FAQ
Is this darker than Liquid Metal Silver?
Yes — noticeably. Tungsten Steel is the darkest film in the Liquid Metal range; the silver sits several shades lighter.
Is it a chrome or a gunmetal?
Gunmetal. It reflects like metal but the base is a deep grey with a warm undertone, not a mirror.
Will it look black in shade?
It will darken toward charcoal. Direct sun is what shows the metallic grey; flat light pushes it much darker.
Can I polish out a light mark?
No. Marks cannot be polished out of a film, so an affected panel usually has to be redone.
Will one roll wrap my whole car?
Depends on the vehicle, and a directional metallic usually needs more allowance than a solid colour. Measure before you assume one roll is enough.
ZionYEE Liquid Metal Tungsten Steel Car Wrap Film 5×50ft
Finish and appearance
Liquid Metal, metallicLike the other Liquid Metal films, reflections here are fluid rather than sharp — highlights drift as you move along the car. Dark metallic surfaces make that movement easier to see than light ones do, which is part of the appeal and also the part that demands consistency between panels. In sun, expect a bright metallic edge along the creases against a deep grey body; in shade it darkens toward charcoal; at night it holds long, low reflections from nearby lighting.
Dark metallics are routinely shown too light and too flat on screen. Expect the delivered film to be deeper and more obviously metallic than the gallery suggests, and confirm the roll in daylight before cutting.
Appearance varies with lighting, viewing angle, panel shape and display.
Specifications
- Finish
- Liquid Metal, metallic
- Roll width
- 5 ft
- Roll length
- 50 ft
- Gross roll area
- 250 sq ft
- Adhesive
- Air-release; supports lifting and repositioning during installation
- Release liner
- PET
- Typical applications
- Full or partial vehicle wraps, interior trim and accents
Coverage depends on the vehicle, panel layout, installer and cut plan. Follow the product instructions for film-specific construction and application details.
Plan your material
This roll measures 5 ft × 50 ft (250 sq ft gross area). It does not guarantee coverage for a particular vehicle.
- Measure panels individually, including edges and curves.
- Check cut direction and seams against the 5 ft width.
- Allow for alignment and recuts; confirm the plan with your installer before cutting.
Installation and care
The air-release adhesive helps trapped air move toward an open edge. The film can be lifted and repositioned during installation. Apply as directed in the instructions supplied for this film.
Wait 24–48 hours before the first wash. Hand wash with pH-neutral car shampoo and avoid abrasive or automatic brush washes. For removal, use heat-assisted removal as directed for this film; paint condition and installation time can affect results. Test a small area first.
About the gallery images
Gallery images are appearance references for this colourway. Lighting, screen settings and panel shape affect how the colour reads.
Shipping and returns
Free tracked shipping to eligible addresses in the contiguous United States. Please see our shipping policy for processing times, destination-specific delivery estimates and service exclusions. Shipping Policy
Returns may be requested within 30 days of delivery. Eligibility and item-condition requirements apply. Returns Policy