ZionYEE Crystal Glacier Blue car wrap; AI-generated storefront product visualization; illustrative appearance, not physical material or customer-installation proof.

ZionYEE Crystal Glacier Blue Car Wrap Film 5×50ft

Glacier Blue / 5FT x 50FT
$269.00
Sale price  $269.00 Regular price 
Skip to product information
ZionYEE Crystal Glacier Blue car wrap; AI-generated storefront product visualization; illustrative appearance, not physical material or customer-installation proof.

ZionYEE Crystal Glacier Blue Car Wrap Film 5×50ft

$269.00
Sale price  $269.00 Regular price 
Size/ColorGlacier Blue / 5FT x 50FT

Crystal Glacier Blue is a pale, icy blue from ZionYEE's Crystal Gloss range — closer to the blue inside a shard of glacier ice or in the shadowed side of a snowdrift than to a bright sky blue. It is a colour-change vinyl film supplied as one 5 ft × 50 ft roll for drivers who want a cool, quiet blue.

  • Pale icy blue with plenty of white in the mix and no metallic flake
  • Acrylic-based air-release adhesive, repositionable during fitting; dry application
  • One roll, 5 ft × 50 ft (250 sq ft gross) — enough material to plan a full colour change; usable coverage depends on your cut plan

FAQ

Is Glacier Blue the same as Sea Breeze Blue?

No. Both are pale non-metallic blues, but Glacier carries more grey and reads like ice, while Sea Breeze is lighter and a touch more colourful.

Is it glossy?

Yes — high-gloss crystal finish with clear reflections.

Will it look white in the sun?

The brightest highlights can shift toward a pale grey-white, but away from the direct reflection the blue stays clear.

Can I reposition the film while fitting?

Yes. The acrylic-based air-release adhesive is repositionable during installation, which is what makes a DIY fitting practical.

Will one roll wrap my whole car?

Depends on the vehicle. 250 sq ft of material is not 250 sq ft of installed coverage — measure your panels before assuming one roll is enough.

ZionYEE Crystal Glacier Blue Car Wrap Film 5×50ft

Finish and appearance

Crystal Gloss
Glacier Blue has a lot of white and a little grey in it. Think of the blue that shows up in snow shadow, or the colour of blue ink diluted in a glass of water — cool, light, and never electric. It is a flat, non-metallic colour, so there is no flake or sparkle to catch the light; what you get instead is a clean, even wash.

Reflections are clear, and the high-gloss surface is what gives the pale base some body — without it this would look like a sheet of pale plastic. On a bright day the highlights can wash the blue out toward a very light grey-blue at the brightest point of a panel, while the rest of the same panel holds its colour. In shade the blue gains a little grey and reads closer to cool concrete; at night it becomes a pale grey with only a faint blue tinge that strong lighting will reveal.

Light blues are very sensitive to screen white balance. On a cool display this can look almost white; on a warm one, noticeably bluer than the film. Judge the delivered roll in daylight, before you cut.

Appearance varies with lighting, viewing angle, panel shape and display.

Specifications

Finish
Crystal Gloss
Roll width
5 ft
Roll length
50 ft
Gross roll area
250 sq ft
Adhesive
Air-release; supports lifting and repositioning during installation
Release liner
PET
Typical applications
Full or partial vehicle wraps, interior trim and accents

Coverage depends on the vehicle, panel layout, installer and cut plan. Follow the product instructions for film-specific construction and application details.

Plan your material

This roll measures 5 ft × 50 ft (250 sq ft gross area). It does not guarantee coverage for a particular vehicle.

  1. Measure panels individually, including edges and curves.
  2. Check cut direction and seams against the 5 ft width.
  3. Allow for alignment and recuts; confirm the plan with your installer before cutting.

How much vinyl wrap do I need?

Installation and care

The air-release adhesive helps trapped air move toward an open edge. The film can be lifted and repositioned during installation. Apply as directed in the instructions supplied for this film.

Wait 24–48 hours before the first wash. Hand wash with pH-neutral car shampoo and avoid abrasive or automatic brush washes. For removal, use heat-assisted removal as directed for this film; paint condition and installation time can affect results. Test a small area first.

Car wrap installation for beginners

Gallery images are appearance references for this colourway. Lighting, screen settings and panel shape affect how the colour reads.

Shipping and returns

Free tracked shipping to eligible addresses in the contiguous United States. Please see our shipping policy for processing times, destination-specific delivery estimates and service exclusions. Shipping Policy

Returns may be requested within 30 days of delivery. Eligibility and item-condition requirements apply. Returns Policy

You may also like